Kora-8 10x10cm
Minimum order:
Zellige 10×10 -> Stock -> 1m2. Customised -> 4m2
Zellige 5×15 – > Stock -> 1m2. Customised -> 4m2
Zellige plate -> 1m2 (both in stock and customised)
Minimum order:
Zellige 10×10 -> Stock -> 1m2. Customised -> 4m2
Zellige 5×15 – > Stock -> 1m2. Customised -> 4m2
Zellige plate -> 1m2 (both in stock and customised)
Reference: ZS81
Measures: 10 x 10 x 1,5 cm
Weight: 0.24 kg
Units per m2: 100
Minimum order of 2m2 for stock models and 4m2 for customised models.
The composition of the hydraulic tile is based on grey cement, white cement, marmolina (fine marble dust), sand and pigments. The different elements are put into a mould inside a hydraulic press and when they are pressed, a tile is made, which is then moistened and finally hardened and dried in the air. The hydraulic tiles are made one by one by a craftsman, as always, with a hydraulic press. The craftsmanship of these tiles makes them unique pieces, and there may be a slight difference in the tones and colours of the tiles. The hydraulic tiles are mainly used for floors, although they are also placed on walls, decorating all kinds of rooms, as well as in swimming pools, benches, fountains, etc… We offer a large number of designs in hydraulic mosaic, allowing the customer to design their own floor with our simulator or choose one of the models we have in stock. We will also show the customer how to lay it and how to maintain it correctly. We advise our clients, therefore, in the initial phase of choosing the tile, in its installation and maintenance and then we accompany them in the resolution of any incident.
The composition of the hydraulic tile is based on grey cement, white cement, marmolina (fine marble dust), sand and pigments. The different elements are put into a mould inside a hydraulic press and when they are pressed, a tile is made, which is then moistened and finally hardened and dried in the air. The hydraulic tiles are made one by one by a craftsman, as always, with a hydraulic press. The craftsmanship of these tiles makes them unique pieces, and there may be a slight difference in the tones and colours of the tiles. The hydraulic tiles are mainly used for floors, although they are also placed on walls, decorating all kinds of rooms, as well as in swimming pools, benches, fountains, etc… We offer a large number of designs in hydraulic mosaic, allowing the customer to design their own floor with our simulator or choose one of the models we have in stock. We will also show the customer how to lay it and how to maintain it correctly. We advise our clients, therefore, in the initial phase of choosing the tile, in its installation and maintenance and then we accompany them in the resolution of any incident.
Request a quote
